Build IPOP for Ubuntu, Raspberry Pi 3 and Raspberry Pi Zero

	Description
Tested on	Ubuntu 14.04 and 16.04 x64 Raspbian Stretch on Raspberry Pi 3 Raspbian Stretch on Raspberry Pi Zero
Time	~ 20 Minutes
Question(s)	- How to build IPOP?
Objective(s)	- Build IPOP Source Code

Download and Install Dependencies

sudo apt update -y
sudo apt install -y git make libssl-dev g++-5 python3 python3-pip python3-dev
sudo -H pip3 install --upgrade pip
sudo -H pip3 install sleekxmpp psutil requests 

Build IPOP

Run the following commands as a regular (non-root) user:

mkdir -p ~/workspace/ipop-project ~/workspace/ipop-vpn/config
cd ~/workspace/ipop-project/

Get Tincan and WebRTC Libraries

Note: If you have already built the WebRTC libraries yourself following this Wiki’s instructions, this step is already done and you should skip it.

For master branch (Development):

git clone https://github.com/ipop-project/Tincan

For other branches, for instance bh1 (Latest Stable Release):

git clone -b bh1 --single-branch https://github.com/ipop-project/Tincan

Ubuntu, x86_64:

git clone -b ubuntu-x64 --single-branch https://github.com/ipop-project/3rd-Party-Libs.git Tincan/external/3rd-Party-Libs

Raspberry Pi 3, ARMv7:

git clone -b rpi3-arm7 --single-branch https://github.com/ipop-project/3rd-Party-Libs.git Tincan/external/3rd-Party-Libs

Raspberry Pi Zero, ARMv6:

git clone -b rpizero-arm6 --single-branch https://github.com/ipop-project/3rd-Party-Libs.git Tincan/external/3rd-Party-Libs

Get Controllers

For master branch (Development):

git clone https://github.com/ipop-project/Controllers

For other branches, for instance bh1 (Latest Stable Release):

git clone -b bh1 --single-branch https://github.com/ipop-project/Controllers

Then:

cd Tincan/trunk/build/

To build the Tincan binary in debug mode:

make DEBUG=1
cp -f ../out/debug/$(uname -m)/ipop-tincan ../../../../ipop-vpn/

Otherwise, for release mode:

make
cp -f ../out/release/$(uname -m)/ipop-tincan ../../../../ipop-vpn/

Then:

cd ../../../Controllers
cp -rf ./controller/ ../../ipop-vpn/

Copy Configuration File

You will need a valid configuration file (ipop-config.json) in ipop-vpn/config directory to run IPOP. You may find a sample config file in the Controllers repo root which you have already cloned into your machine.